Steel Rolling Mill Parts

Our company is engaged in manufacturing, supplying and exporting a range of products manufactured using premium quality raw material. Proven on all quality standards, our products are highly appreciated and accepted by clients in national and international market. Support from client and their feedbacks has helped us in growing and enhancing quality of pour products. Products offered by us include Forgings, EOT Cranes, Fuel Saving Devices, Sheet Rolling Mills, Castings and Steel Rolling Mill Plant / Machinery.

Plate Scrap Cutting Machine

Plate Scrap Shearing Machine These are generally heavy duty type machines used for cutting re rollable scrap (plates rails channels rounds angles squares, etc in cold condition These are usually used by scrap mills to prepare rolling stock in suitable shape and size for Re rolling Very useful in induction melting Furnace scrap processing yard to cut Pieces of Pipe angles channels sheets flats and round etc. We manufacturer scrap shearing machine with to minimum capacity of 18 mm to maximum of 75mm(cold metal).

V-Belt Pulleys

Salient Features :

A Pulley is a power transmission cum speed controller device which can be used at various places depending on the application and size.
In Rolling Mills it is used between motor to flywheel so as to control speed, input speed as per the application. It is duly machined and balanced and comes in all groove sizes and bores.

Technical Specifications :

Sizes Available 150 mm to 2000 mm Dia.
CI Casted Pully, Best Quality Bearings & Plummer Blocks.

Cooling Bed

Salient Features :

Cooling Beds are used after the last finishing stand to receive the hot Bars/Sections.We manufacture following type Of Cooling Beds :

"W" Channel Type Cooling Beds Kick off Type cooling beds.
Automatic Rack Type Cooling Beds for TMT Bars.

Rolling Mill Machine Gears

We also offer Rolling Mill Machine Gears.

Salient Features :

Smooth operation and High strength in contact of the teeth
Elimination of side ways force and Fully balanced thrust load
Lower load on gear reducer housing and Large face overlap due to absence of axial thrust
Excellent and smooth transfer of torque & motion at high rotational velocities

Gear Coupling

Engineering Detail For Full Gear Coupling:

Coupling No.	Maximum bore in mm	Maximum Load in H.P.	Maximum Speed in R.P.M
106	100	350	2500
107	125	550	2100
108	140	750	1900
109	165	800	1700
110	210	1000	1400
111	250	1500	1250
112	320	2000	1120

Reduction Gear Box

Salient Features :

Designed to work efficiently at peak loads case hardened and grinded double helical gears.
Torisionally rigid steel fabricated body designed to dampen vibrations and Amply rated bearings.
Forced Lubrication and Splash Lubrication.

Technical Specifications :

Gear boxes for 100 HP to 2000 HP.
Single, double & multi stage reduction gear boxes as per requirement and Gears in module and DP system.

Mill Stand With Fibre Bearing

Salient Features :

We are engaged in the manufacturing of steel rolling mill stands that has gained appreciation for international quality standards. Compact and simple in design, these are used for the rolling of wire rods, TMT, light medium heavy sections steel production of ferrous and non-ferrous metals.

Available in CI casted, MS casted & steel fabricated, these steel rolling mill stands can be customized as per the client’s specific requirements with Minimum maintenance and down time, Longer service life

Furnance Pusher

Salient Features :
In Rolling Mills it is used to Push Raw Material for Re heating Furnace.

Technical Specifications:

Manufactured in many sizes according to Furnace size.

Pinch Roll

Salient features :
Pinch rolls are used between roughing mill and intermediate finishing mill to carry the hot rolled material, to rotary shear & conveyors. The pinch roll comprises stationary frame.

This arrangement provides an advantage of:

minimized space with compact structure
compact and simple design
easy to install and requires minimum maintenance

Furnance Ejector

Salient Features :
Our range of furnace ejector is manufactured using quality tested raw material with the help of our cutting edge technology and experienced workforce. These furnace ejectors are appreciated worldwide for its excellent quality, dimensional accuracy and optimum utility. These are in high demand by our client’s spread worldwide.

Technical Specifications :

Suspension plate: Cast steel, ribbed for reinforcement.
Thrust bearing and Guide bearings
Shaft: Alloy steel, grinded and polished
Impeller: Cast steel, non-clog, one piece, balanced; keyed and locked to the shaft.
Impeller adjusting nuts: Bronze lock nuts.
Motor shaft connection: Flexible coupling machined and balanced. Vertical, locked to the suspension plate, terminating in a flanged, 45 degrees elbow
Suspension leg: Cast steel with integral end flanges for each section.
Lubrication: Individual flexible copper grease lines for each guide bearing, terminating in a grease fitting above the suspension plate

Roller Guide Box

Salient Features :

Roller guide boxes are employed in a continuous rolling operation in which the stock being rolled is properly twisted between each two adjacent rolling mills. These boxes are provided with heavy duty taper roller bearing for larger sections. Simple design allows easy installation with smooth operation in different rolling conditions. Our roller guide boxes are available in different specifications at the most competitive prices.

Cast Iron / Mild Steel / Stainless Steel Casted
Spring Steel Roller holders with high elasticity
Simple design, Low cost and easy maintenance

Twister Pipes

Salient Features :

We offer high quality twister pipes widely used for twisting and bending the pipes. Made from high quality raw material, these pipes feature high metallurgical strength that guarantees ultimate durability. Innovative of the mouthpiece provides perfect grip on pipes and tubes of different diameters.

Available in different specifications based on the requirement of the clients.

Compact, sturdy design, Can be easily stored
High strength, rigidity, Can easily be used for pipes and tubes of different dimensions

Technical Specifications :

Sizes Available 150 mm to 3500 mm Dia.
CI Casted Shaft, Best Quality Bearings and Plummer Blocks

Shutter Profile Machine

Salient features :

rolling shutter side channel machine
production capacity : 2 m. Ton/hr.
rolls : en-31
no. Of pcs : 16

Roller Conveyor

Salient Features :

Roller conveyor is among the most common pieces of equipment found in every Industries. This conveyor is mostly used as transportation for Hot and cold producets. cartons, packages or pallets over shorter distances

Technical Specifications : As per Customer Requirements.

Straightening Machine

Salient Features :

suitable for Section Straightetning.
High Quality Chill/S.G. Iron/Adamite Rolls.
Heavy Duty Worm Gear Type Screw Down Mechanism.
Steel Fabricated Body suitable For Joists Up-to 500mm.
Angles upto 200 x 200mm and Channels upto 400mm.
Mechanical system.

Technical Specifications :
No. of Roll 10/8, Available in 130mm, Roll Centers to 450mm, Roll Centres Suitable for all Types of Sections

Universal Spindles

Salient Features :

Spindles are used as device for power transmission and are placed between Couplings.
Spindles are manufactured out of forged steel, basically EN-8 or EN-9 and are property machined as per the design and requirement.

Universal Couplings

Salient Features :
Our in-house production unit is equipped with state-of-the-art technology to ensure the most optimum use of the gives resources. We proffer wide range of products which include Universal Coupling, flexo couling, gear coupling etc.